HN

Need help?
<- Back
Phyphox – Physical Experiments Using a Smartphone

Phyphox – Physical Experiments Using a Smartphone

_Microft

Comments (35)

  • davidhoell
    The coolest thing I ever did with that was finding wires in a friends wall - we needed to drill a hole and it was unclear whether the wires went up (problem) or right from the outlet. I didn't have a cable finder on hand but did have the epiphany to put a large load on the outlet (we used a kettle, a hairdryer would also work, just needs a lot of watts) and use the Fourier transform magnet spectrum to find the 50 Hz grid frequency in the wall. Worked beautifully.Sadly, since most smartphone magnetometers seem to have a sample rate of 100/s, this will not be applicable to Americans and everyone else with a 60 Hz grid frequency, the 50 Hz were already at the Nyquist–Shannon limit.
  • slow_typist
    There is a paper you can cite if you use phyphox professionally.[1]In Germany phyphox is quite popular in physics education.However on android the sampling rate of the acceleration sensor is limited to 50/s. At least if you install through the official app store.[1] https://iopscience.iop.org/article/10.1088/1361-6552/aac05e
  • samch
    One of my kids has science project due each quarter in school, and this is our go-to app. We’ve measured acceleration in an elevator, sound attenuation of an audio source in a small vacuum chamber, and the Doppler effect. The app makes it easy to capture and export the data points to make graphs. I highly recommend this even just to play around with.
  • sudb
    I think there's loads of scope to use phone cameras as dataloggers too, especially for older equipment that doesn't have an easy way to connect/export the data.(I've been meaning for ages to write a piece of software that's able to extract change over time data from a video of a 7 segment display, like on a balance or a digital thermometer or something)
  • crtasm
  • trebligdivad
    Damn that's very impressive - for a long time Android had a lot of hopeless accelrometer, audio scope, etc apps, and it's always been hard to add your own stuff to it. Sounds very very neat!
  • gozjsbtm
    Coincidentally, I downloaded the app yesterday. In 10 min, in my mitchen, I found g ~ 9.7 m/^2 using a cheap kitchen spring scale and the accelerometer (without g) sensor. Quality app.
  • xnx
    Seems like a more advanced version of Arduino Science Journal https://www.arduino.cc/education/science-journal/
  • OuterVale
    I've had great fun using Phyphox to visualise my hand getting closer/farther from my phone based on the presence of my magnet implant. So many cool little things the app can visualise and measure, especially when used it creative ways.
  • eru
  • perlgeek
    I used it just the other day.My parents have a sound bowl, and I wanted to know the resonance frequency. Took an audio spectrum, zoomed in on the first peak, read the frequency (iirc it was around 208 Hz).
  • tomaskafka
    It’s the GOAT - I showed the app to a bunch of secondary school physics teachers and they were thrilled.
  • _Microft
    The title was slightly editorialized for clarity.
  • DaSHacka
    I've been using Trail Sense [0] for sensor-related information after learning about it from a friend.The interface is more polished, but the information is less technical than Phyphox (as the app is geared towards being a survival toolkit).[0] https://github.com/kylecorry31/Trail-Sense
  • q3k
    Good toolkit to have around. Recently used it to verify the true RPM of a system (using the accelerometer spectrum tool) against its control loop implementation.
  • black6
    If you prefer not to deal with an app store: https://www.apkmirror.com/apk/rwth-aachen-university/phyphox...
  • Kevin_VAI
    [dead]
  • takahitoyoneda
    [dead]
  • henryAlbigale
    Cool app dude