HN

Comments (68)

• mrandish
  Just want to mention that hobbyists into fixed wing RC aerobatics have been doing crazy stuff with variable pitch propellers (VPP) for several years. RC motors with integrated variable pitch propellers exist in small sizes, so no need to DIY the propeller for that application. Here's an example of the 4D aerobatics they enable: https://www.youtube.com/watch?v=j5EsvZNvVRs.This is similar to but different than what the creator of the one motor drone is doing since he's spinning at higher RPM with the pitch varying under CPU control much faster than fixed wing aerobatic pilots who are controlling everything manually with insane skill. I assume the one motor drone guy already knows fixed wing RC VPP exist, just mentioning for others who might not.
• Menu

  TGower
  Underactuated robotics are so cool. In the hobby BattleBots community, there is a design where the whole robot only has a single motor, but it's able to move in any direction and damage the opponent, all just by controlling the single motor's speed.Most robots have at least three motors, two drive sides and a weapon motor. The trick to getting away with one is integrating an impactor into the chassis of your bot, using the single wheel to spin up to ~3k RPM, then by tracking the rotation angle of the bot as it spins, you speed up a little while the wheel is pointing where you want to go, and slow it down a little when it's pointing the other direction.
• Menu

  nadermx
  This is well worth the entire watch. It feels like what would any hacker do in trying to figure out how to make something they want to exist. Also very well presented and good pace.Inspires me to try and start doing some robotics.
• _joel
  This is from the same guy (Joshua Bird) that built the 4 axis 3d printer (and special algo for it too) https://www.youtube.com/watch?v=VEgwnhLHy3g
• Menu

  leoedin
  A really neat concept. It uses a special hinge design, a magnetic encoder and torque modulation to control the lift of the rotor as it spins. Completely negates the need for a conventional helicopter's swash plate.The single motor does have the pretty major downside that it spins the moment it's in the air. I suspect a 2 motor drone with a tail motor would be a lot more practical. But I really like how mechanically simple the rotor hinge design is - it pushes all the complexity into the control algorithm.
• sastra
  The Picocolissimo also uses only one motor: https://www.youtube.com/watch?v=UE47bcCxT_I
• jcims
  Side note, I used those same moteus controllers for a decidedly less energetic use case (two axis gimbal for RF satellite tracking) and found them to be super high quality and the lead developer always super helpful. Been a few years but def worth a look if you want to get into motor control.
• subprotocol
  Reminded me of the Manhack: https://half-life.fandom.com/wiki/Manhack
• Menu

  mogili
  It's a pretty cool concept, however, fails to mention coaxial rotor design that has a single motor and has much simpler control systems. I am also curious on how this affects frame vibration.This is a newer trend in mechanical design that leverages more complex control software to overcome mechanical issues. A good example is https://turntide.com/
• ghm2180
  I was wondering did he use the control mixer MCU (initially mentioned in the video) at all? The encoder should always feed into the MCU directly.
• justinator
  Yeah that's probably the coolest thing I've seen all month. How could you not like this?
• ghm2180
  I am surprised he is not wearing more protection. that thing looks like a hornet in bedroom test mode. Play safe.
• Menu

  razster
  Slap a MEMS gyroscope on that bad boy. https://www.vectornav.com/resources/inertial-navigation-prim...
• mainecoder
  Amazing work this is really innovative and it could be applied to a larger drones provided that the margin of error is reduced.
• tyrabound
  I’m sure glad we are making immense progress towards the dystopian hell where massive swarms of mini drones are hunting down obsolete and marked for termination flesh bots, aka humans.
• Menu

  tintor
  How will this new tech affect the current drone war between Russia and Ukraine?Smaller, cheaper, more numerous offensive drones?
• Menu

  mr_coffee
  Serious question - how do you even learn all of the skills to do something like this? Where would you start?
• Menu

  walrus01
  There's also been a few people building monocopters with a fixed, non tilting motor and prop, and four servo motor actuated fins at the bottom that can be used for thrust vectoring and to counter rotational forces.https://www.youtube.com/watch?v=u2cETOyuJ20
• Menu

  russellbeattie
  It's incredible that changes in velocity still work to adjust the angle of the blades even at the insane speeds they're moving at. I would never have thought that was possible.I have to wonder why this guy didn't give his drone a leash while testing so it couldn't go flying off. It's the first thing that popped into my head, so I'm sure it's something he thought of as well and didn't use for a good reason. Maybe a string would get caught in the blades?
• Menu

  johnnyApplePRNG
  I am torn about drone tech now.I used to be super stoked about it.But watching drones kill civilians kind of ruined it. [0]Then again ... they do put a dent in superpowers powers apparently so ... like I said ... I am torn.[0] https://www.bbc.com/news/videos/czdmrm6y7r0o